AIM AR/M16 H4 .223/5.56 Titanium Nitride 9310 MPI Bolt Carrier Group

SKU: XAIMBCGH4TIN3

$119.95 Quantity:  

     Add To Wish List      

AIM H4 AR/M16 5.56/.223/.300 BLACKOUT caliber complete Titanium Nitrided Bolt Carrier Groups. A newly designed carrier reduces the surface area contact between the carrier and receiver walls. This improves performance and reliability as it reduces drag and creates "debris" channels to reduce malfunctions. Features; Shot peened, MPI (Magnetic Particle Inspected), 9310 Tool Steel Bolt; 8620 M16 carrier, Properly staked machined billet gas key hardened to USGI specifications fastened with Hardened Grade 8 Fasteners; Shot peened MPI (Magnetic Particle Inspected) Bolt. Extractor insert installed. Proudly made in the USA with a Lifetime Warranty.

FREE SHIPPING ON THIS ITEM IN THE 48 STATES!
WARNING: This product can expose you to chemicals including nickel & chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov


Assembly
The requirements for assembly of our Bolt Carrier Groups are much higher than most. Before assembling the gas key to the carrier, permatex NO.3D aviation is applied to form-a-gasket around the gas hole (per MIL-SPEC). Then Grade-8 hardware is used to attach the gas key, followed by properly staking per spec. When installing the extractor to the bolt, a crane-o-ring is inserted with the spring to insure proper ejection. Then high temperature grease is applied to the gas rings before inserting the bolt into the carrier, which allows for much smoother operation. These BCGs are inspected to the highest of standards, to insure a high quality product that is 100% reliable for our customer… PROUDLY MADE IN THE USA!

Carrier
  • M16 style (Auto)
  • Machined from 8620 tool steel
  • Heat treated to military specifications
Bolt
  • Machined from 9310 tool steel
  • Heat treated to military specifications
  • Shot Peened
  • Ground to meet military required tolerances
  • MPI (Mag Particle Inspected)
Gas Key
  • Machined from 4140
  • Heat treated to military specifications
Extractor
  • Machined from 4140
  • Heat treated to military specifications
  • Shot peened
Firing Pin
  • Machined from 8640 tool steel
  • Heat treated to military specifications
  • Ground to meet military required tolerances
  • Coated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2
Cam Pin
  • Machined from 4340
  • Quench and temper heat treat
  • Ground to meet military required tolerances

 

You must be logged in to use this feature. LOGIN

©2018 AimSurplus, LLC, all rights reserved. Terms & Conditions. 1-888-748-5252 EMail: 'sales@aimsurplus.com' An IMX Solutions Inc. EOS360 Extend Solution.