Daniel Defense MK18 .223/5.56 AR NFA/Pistol Upper Receiver TAN  SKU: XDD8013

$929.95 Quantity:    


FREE SHIPPING on this item in the 48 States!
All NFA/ATF Rules Apply.
You may not install this upper on a lower receiver unless it is a NFA Registered SBR, Machine Gun, or Pistol. Possession of this upper along with a Non-NFA Lower is Prohibited, except when installed on a Pistol configuration firearm.

Daniel Defense manufactures the highest quality complete AR15 upper receivers on the market today! Every Daniel Defense upper is painstakingly hand assembled, quality assurance tested, and test fired to ensure that the highest quality product. The Daniel Defense DDMK18 upper receiver group come complete with bolt carrier group and charging handle, 10.3" Cold Hammer Forged Barrel, RIS II MK18 Rail System, and Daniel Defense low profile gas block.

   
 
MATERIALS & CONSTRUCTION
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Government Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
  • RAIL LADDERS: 3 low profile ladders made from Santoprene, heat resistant to 300° F.
  • Made in the USA!
WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious and inexpensive manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
ALL NFA RULES APPLY

ADDITIONAL INFORMATION
  • Gas System Carbine
  • Barrel Length 10.3"
  • Product Weight 3.71 lb

 


RIO Royal 12GA 2 3/4" 1oz Slug 5 Rd Box

RIO Royal Buck 12 Gauge Slug Shotgun ammunition. Features a 2 3/4" Clear Hull, 1 oz. Slug and 1,410 FPS muzzle velocity. Packaged 5rds to a box, and 250rds (50 boxes) to a case.

$3.39

RIO Royal 12ga 00 Buck (Low Recoil) 2 3/4" 5rd Box

RIO Royal Buck 12 Guage 00 Buck Low Recoil Shotgun ammunition. Features a 2 3/4" Clear Hull, 9 Lead Pelets and 1,200 FPS muzzle velocity. Packaged 5rds to a box, and 250rds (50 boxes) to a case.

$2.59

Geco .22lr Rifle 40grn LRN 50rd box

Target shooters can always depend on the cartridge’s perfect functioning, consistent performance and good precision. Optimized for Bolt Action Rifles. Features a 40grn Lead Round Nose bullet and brass Rimfire case. Packaged 50rds to a box, 10 boxes (500rds) to a brick and 5,000rds (10 Bricks) in a case.

$5.95

Prvi Partisan PPU 7MM-08 PSP 140grn BT 20rd Box

Prvi Partisan PPU 7MM-08 Remington ammunition. Features a 140grn copper jacketed lead core pointed soft point boat tail bullet, brass case and non-corrosive boxer primer. Packaged 20rds to a box and 500rds (25 boxes) to a case.

$15.95


©2014 AIM, all rights reserved. Policies. 1-888-748-5252 EMail: 'sales@aimsurplus.com' An IMX Solutions Inc. EOS360 Extend Solution.